弊社が提供した問題集がほかのインターネットに比べて問題のカーバ範囲がもっと広くて対応性が強い長所があります。JPexamが持つべきなIT問題集を提供するサイトでございます。
わずか数年の中に、Microsoft MB7-514認定試験がたくさんの人の日常生活にとても大きい影響を与えています。簡単で順調にMicrosoft MB7-514認定試験を通すのは問題になりますが、JPexamはこの問題を解決できるよ。弊社の問題集はIT技術者がこつこつ研究して、正確で最新なもので君のMB7-514認定試験を簡単に通すことにいいトレーニングツールになりますよ。JPexamを選られば、成功しましょう。
JPexamのMB7-514参考書は間違いなくあなたが一番信頼できるMB7-514試験に関連する資料です。まだそれを信じていないなら、すぐに自分で体験してください。そうすると、きっと私の言葉を信じるようになります。JPexamのサイトをクリックして問題集のデモをダウンロードすることができますから、ご利用ください。PDF版でもソフト版でも提供されていますから、先ず体験して下さい。問題集の品質を自分自身で確かめましょう。
試験番号：MB7-514問題集
試験科目：NAV 5.0 C/SIDE Introduction
最近更新時間：2014-02-28
問題と解答：全104問
100％の返金保証。1年間の無料アップデート。
JPexamは正確な選択を与えて、君の悩みを減らして、もし早くてMicrosoft MB7-514認証をとりたければ、早くてJPexamをショッピングカートに入れましょう。あなたにとても良い指導を確保できて、試験に合格するのを助けって、JPexamからすぐにあなたの通行証をとります。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/MB7-514_exam.html
NO.1 What happens if you set the Editable property of a field in a table to "No"?
A.The field will not be modifiable, whether you use a form or C/AL code.
B.You will not be able to modify the field using C/AL code, but you can still modify it using a form.
C.You will not be able to modify the field using a form, but you can still modify it using C/AL code.
D.The field will not be able to be used on forms.
Correct:C
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.2 When is it possible to change the name of a field in a table?
A.You must first delete the data from the field in all records in the table before changing the field name.
B.You must first remove all references to the field in other tables, forms, and reports.
C.You can always change the name of a field in a table.
D.You can never change the name of a field in a table.
Correct:C
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.3 What field property will cause a lookup form to be displayed when the F6 key is pressed?
A.OptionString
B.Lookup
C.TableRelation
D.ValuesAllowed
Correct:C
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.4 Which property is used to define a table relationship?
A.TableConstraint
B.RelateField
C.DataItemLink
D.TableRelation
Correct:D
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.5 Into which table are the Journal Entries made for the Sales & Receivables Functional Area?
A.Cust. Journal Line
B.Cash Rec. Journal Line
C.Gen. Journal Line
D.Receivables Journal Line
Correct:C
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.6 You have a table in which the user makes journal entries. According to Microsoft Dynamics
NAV standards, what type of form is used with this table?
A.List Form
B.Card Form
C.Worksheet Form
D.Tabular Form
Correct:C
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.7 In a standard Microsoft Dynamics NAV Functional Area, describe the table relationship(s)
between a Master table and the corresponding Ledger table.
A.A field in the Master Table is table-related to the Ledger Table.
B.A field in the Ledger Table is table-related to the Master Table.
C.The Master Table and the Ledger Table each have a field that is table-related to the other.
D.The Ledger Table and the Master Table do not have any fields that are table-related to the other at all.
Correct:B
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.8 Which of the following Functional Areas has more than one Master Table?
A.General Ledger
B.Fixed Assets
C.Inventory
D.Sales & Receivables
Correct:B
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.9 Which are the valid "parts" of a table in Microsoft Dynamics NAV?
A.Data and Legs
B.Data and Properties
C.Data and Description
D.Source and Description
Correct:C
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.10 Which Data Type is best for storing whole numbers in a table, especially when there are
database size limitations?
A.BLOB
B.Integer
C.Decimal
D.Code
Correct:B
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.11 Key Groups are used to:
A.Allow keys to have a group of fields containing more than one field.
B.Define the group of reports that use a key in a table.
C.Activate and deactivate a seldom used group of keys.
D.Associate a group of keys with a report.
Correct:C
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.12 When you create a table relation, which characteristic must be true of the table specified by the
table ID?
A.The field ID specified must be part of the primary key.
B.The table must be a master table.
C.The table must not contain any records.
D.The primary key must be a code data type.
Correct:A
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.13 Which of the following best describes Tab Controls?
A.Tab controls can only contain one tab, named General.
B.Tab controls must contain a tab named General. Any additional names are specified using the
NewTabName property.
C.Tab controls can contain multiple tabs; the names of which are specified using the MultipleTab property.
D.Tab controls can contain multiple tabs; the names of which are specified using the PageNames property.
Correct:D
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.14 What is the maximum number of fields that can be contained in a secondary key?
A.1
B.2
C.20
D.40
Correct:C
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.15 What is the Master Table for the Cash Management Functional Area in Microsoft Dynamics NAV?
A.Customer
B.G/L Account
C.Cash Account
D.Bank Account
Correct:D
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.16 Using standard navigation in Microsoft Dynamics NAV, pick the three options to access the
ledger form from a card form.
A.Pressing Ctrl+F5, selecting the Ledger Entries menu item, or selecting the Drilldown button on a
flowfield.
B.Pressing Ctrl+F5, selecting the Ledger Entries menu item, or selecting the Lookup button on the tool
bar.
C.Pressing the F5 key, selecting the Ledger Entries menu item, or selecting the Drilldown button on a
flowfield.
D.Pressing the F5 key, selecting the Ledger Entries menu item, or selecting the Lookup button on the tool
bar.
Correct:A
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.17 A SumIndexField is a field that can be attached to a key definition. Which of the following are
accurate characteristics of a SumIndexField?
A.A SumIndexField can be any data type and can be attached to any key in the table.
B.A SumIndexField must be a decimal field and can be attached to any key in the table.
C.A SumIndexField must be a decimal field and can only be attached to the primary key.
D.A SumIndexField can be any data type and can only be attached to the primary key.
Correct:B
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.18 Which of the following characteristics are not a result of table relationships?
A.Validate data entries.
B.Optimize table records.
C.Perform Lookup in other tables.
D.Automatically propagate changes from one table to other tables.
Correct:B
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.19 A table description contains the following:
A.Properties, Triggers, Fields, and Keys.
B.Names, Fields, Keys, and Forms.
C.Properties, Data, Fields, and Keys.
D.Data and Keys.
Correct:A
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
NO.20 In the Microsoft Dynamics NAV application, which of these table types will have the most
trigger code (within a single Functional Area)? In other words, which type of table usually has the
most business rules?
A.Master table
B.Supplemental table
C.Journal table
D.Ledger table
Correct:C
Microsoft認定証 MB7-514過去問 MB7-514認証試験 MB7-514過去問
JPexamは最新のIIA-CCSA問題集と高品質のJN0-633問題と回答を提供します。JPexamのHP2-N37 VCEテストエンジンと00M-622試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のCAT-340 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论